1. Communicate with customers on technical solutions and requirements, clarify customer needs and output drawings, digital models, BOMs for dedicated parts and assembly parts;

2. Responsible for DFMEA, QFD analysis, and dimensional chain verification of customer interface components (such as oil pots, push rods, simulators, etc.);

3. Responsible for supplier development communication for customer interface components (such as oil pots, push rods, simulators, etc.), review and confirmation of DFM/DFA and other technical documents, as well as quality issue resolution during R&D phase;

4. Develop DVP verification standards for customer interface components (such as oil pots, push rods, simulators, etc.) and complete OTS approval;

5. Assist in customer sample line debugging support and customer issue resolution;

6. Assist in analysis and resolution of assembly DV issues;

7. Conduct benchmarking analysis of product solutions and identify VAVE optimization opportunities.

1. Responsible for the application development of transmission, pressure building, guidance, and anti-rotation mechanism components in BIBO's full range of products, ensuring that motor product performance and reliability meet system requirements;

2. Responsible for solving problems in the development process of the above components, completing optimization and rectification based on issues exposed during testing and vehicle integration;

3. Complete the output of relevant technical documents in accordance with the product development process;

4. Responsible for supplier technical management;

5. Responsible for confirming assembly performance requirements with integration engineers and interface requirements with relevant modules;

6. Responsible for technical control during simulation and verification processes.

1. Responsible for ABS\EBD\HAL software development based on software requirements;

2. Responsible for writing test cases for ABS\EBD\HAL functions and optimizing code based on test results;

3. Responsible for writing software architecture design documents and detailed design documents for ABS\EBD\HAL;

4. Responsible for interpreting existing ABS\EBD\HAL software and familiarizing with related logic, and able to improve and optimize the software based on experience and actual test conditions;

5. Responsible for identifying and resolving functional or performance issues in ABS\EBD\HAL across various projects, and quickly proposing solutions;

6. Participate in overall software testing, and be responsible for analyzing test issues and proposing corresponding solutions.

1. Responsible for end-to-end project management from consulting-development-SOP-delivery; 

2. Responsible for developing and tracking overall project plans, assigning and managing related tasks;

3. Drive and coordinate project work among R&D and cross-functional teams (including engineering, procurement, production, logistics, etc.);

4. Interface with customer's technical and non-technical teams to ensure requirements implementation and smooth mass production;

5. Track project status and maintain project OPL; 

6. Perform project risk management and escalate major issues and critical risks;

7. Organize and conduct regular internal and external project meetings.

1. Participate in product design reviews and conduct manufacturing feasibility analysis for products;

2. Responsible for developing assembly process flows for new products and preparing process documents such as PFMEA, flow charts, control plans, and work instructions;

3. Responsible for the design, prototyping, and validation of assembly fixtures/tooling for new products;

4. Explore assembly process parameters for new products, and develop and implement process test plans;

5. Prepare design requirements for tooling/equipment/fixtures, evaluate supplier proposals, track progress, and conduct acceptance inspections. 

1. Responsible for the design and development of product hardware boards and logic circuits;

2. Complete overall solutions, component selection, schematic design, PCB Layout, testing and maintenance optimization according to project requirements;

3. Build, test and modify product prototypes, using computer simulations of their principles;

4. Responsible for writing hardware test cases and testing hardware-related circuits;

5. Responsible for product-related test rectification.

1. Responsible for the requirements interface of the wire-controlled braking software project and decomposing it to the development side;

2. Responsible for project requirements baseline construction and configuration tool development;

3. Responsible for software integration and test planning and tracking the process (including functional software and underlying software);

4. Responsible for RTE layer management;

5. Promote and implement the CI/CD process of software;

6. Assist in the production of some special product software (for production testing);

7. Support to complete the relevant work content and problem analysis within the software department.

1. Responsible for overall timing design and timing functional safety design and development of different chassis products;

2. Responsible for memory (Rom, Ram) design and storage functional safety design and development;

3. Lead non-AutoSar architecture design and implementation;

4. Optimize existing OS diagnostic functions and support for mass production projects.

1. Create and improve functional software test case library through FEATURE concept;

2. Promote and improve underlying software test case library through platform and module concepts;

3. Lead the formulation of test strategies and continuously optimize test cases covering functional safety;

4. Ensure the automation level of software testing process and test case coverage effectiveness;

5. Participate in consistency process evaluation of testing process;

6. Support completion of relevant work content and problem analysis within the software department.

1. Establish process documents related to manufacturing quality management;

2. Responsible for setting key quality control points in the manufacturing process, reviewing error-proofing solutions, and preparing error-proof verification samples;

3. Responsible for MSA measurement system analysis and SPC statistical techniques in the manufacturing process;

4. Organize analysis and improvement of quality issues in the manufacturing process, and review and handle non-conforming products on the production site;

5. Collect and analyze manufacturing process quality information to promote continuous quality improvement.

1. Handle quality complaints and feedback from customers, conduct on-site disposal to ensure customer production;
2. Organize 8D meetings, promote internal completion of relevant rectifications for customer quality issues on schedule, and verify the rectification effects;
3. Be responsible for handling customer compensation matters caused by product quality and monitor external quality loss costs;
4. Process non-conforming products at customer sites and returned products, promptly conduct rework, sorting and scrapping, and collect PPM data information;
5. Actively communicate with customers to establish good cooperative relationships;
6. Coordinate and submit engineering change applications caused by quality improvements.

1. Lead the development of MCAL and ECUAL layer modules based on functional safety concepts;

2. Lead internal team reviews, standard evaluations, training, and other related work;

3. Serve as technical expert to lead troubleshooting of on-site customer issues;

4. Assist in implementing embedded software design for product localization solutions;

5. Support completion of relevant tasks and problem analysis within the software department.